Optim VidCap Camera for ENT Endoscopy. Simple add-on solution, user-friendly image management software. The Optim VidCap Camera is a USB system that enables ENT rigid or flexible endoscopy recording simple, convenient, and portable. Downloads Updates and drivers can be found here. Check this area often as new drivers and support files are frequently added. If you have a specific Technical Support inquiry, please email us or call (800 331 0547) NOTE: Unplug the power supply to USB camera or external box before upgrading software. To download VIDCAP INC USB MODULE DRIVER, click on the Download button. Microsoft vidcap download Vidcap 64 Vidcap inc Vidcap 64 bit download Microsoft vidcap 64 download Vidcap capture. The computer is lagging and sometimes unresponsive. The computer is lagging and sometimes unresponsive.
The easiest way to go about installing our Plugable USB to Serial adapter is by starting with the device.
- If you want to verify that the adapter and the driver were installed properly click here
Connect the device to the Mac. Once connected click on the Apple icon and on ‘About This Mac’
Click on ‘More Info…’
Click on ‘USB’ on the left and on the ‘USB-Serial Controller D’
If all is well you should be seeing something like this:
Time to get the driver! Fire up Safari and browse to https://plugable.com/drivers/prolific/ and scroll down to Mac.
Click on the ‘PL2303 MacOSX10.6 dmg v.1.4.0.zip’, the Safari Downloads window should come up:
Double click on the md_PL23-3_MacOSX10
Now double click on the PL2303_1.4.0.dmg to mount the image
Now double click on the PL2303_1.4.0 to start the installation
Once the installer comes up click ‘Continue’ to proceed.
Then ‘Select a Destination’ click on your desired drive and click ‘Continue’ to move forward
Now just click ‘Install’ to continue.
You may be asked of your username and password – enter them and click ‘OK’
You’ll get a warning about restarting the computer after the installation is complete. This is normal, click ‘Continue Installation‘.
Installing should start (takes a couple of minutes to complete)
When it’s done you should see this:
Click on ‘Restart’ to reboot the Mac.
After you restart, check that everything has installed OK.
On the Mac there are two methods to determine this:
Method 1:
Click on ‘Applications’
Click on ‘Utilities’
Click on ‘Terminal’
Type:kextstat | grep prolific
and:ioreg -c IOSerialBSDClient | grep usb
Your results should be very close to this:
Method 2:
Click on ‘System Preferences’
Click on ‘Network’
Now click on the ‘+’ sign on the bottom left, and then on the ‘Select the interface and enter a name for the new Service’ click on ‘Interface’ – you should be seeing the ‘USB-Serial Controller D’ there.
This will create a “Network” interface for a modem or serial port. Because it’s a serial port, it’ll say “Not Configured” and that’s normal:
From the “Advanced” button you can change default settings (usually not needed). And this won’t change the “Not Configured” message – that’s still ok.
Now finally, you need an application which will talk to the serial port. On Mac, the file which maps to the port is /dev/cu.usbserial. If you have a null modem cable and a terminal program on the other side, the Mac actually has a built-in terminal program called “screen” that you can use to test the connection.
Once that is up and connected (and if the serial ports are set to the same baud rate and paramters), you can type on either side and see the characters come across.
Support
Vidcap Download
USB Serial on the Mac is a real melding of the very new and very old. If you have any trouble, just visit plugable.com/products/pl2303-db9/support to see existing FAQs for Plugable’s USB Serial adapter.
Vidcap Software
Where to Buy